Excalibur Crossbow Parts and Maintenance
Routine Excalibur maintenance comes down to rail lubrication, a cheek piece, and practice targets - limb replacement and limb lifespan questions should go to an authorized dealer, not a DIY part swap.
Because Excalibur crossbows are recurve designs, routine maintenance is simpler than a compound crossbow's cam-and-cable upkeep - it mostly comes down to rail lubrication, comfort accessories, and the occasional replacement part. This page covers the maintenance and parts accessories that come up most often.
If you're specifically researching excalibur crossbow limbs replacement or how long Excalibur crossbow limbs last, that's a job best handled by an authorized dealer or Excalibur directly, since limb replacement involves the bow's main energy-storing component - see our dealer locator to find help near you.
Pros
- Recurve design needs far less routine maintenance than a compound crossbow's cam system
- Rail lube and a cheek piece are inexpensive, high-impact upgrades
- Crossbow-rated block target stands up to higher energy than a standard archery target
Cons
- Limb replacement is a job for an authorized dealer, not a DIY part swap
- Cheek piece fitment is limited to specific stock styles (Micro Feather-Lite, Compact Thumbhole)
Rail lubrication
Excalibur's X-Slick rail lubricant is a silicon-based oil applied to the deck rail to reduce friction where the string rides down the barrel on every shot. A light, even coat reduces wear on the string's serving and helps deliver a smoother, more consistent shot - it's one of the few maintenance steps that needs repeating on a regular basis.
Comfort and stability accessories
The Excalibur cheek piece mounts to Micro Feather-Lite and Compact Thumbhole stocks (covering the Matrix Grizzly and Cub) with just two screws, and is built ambidextrous so it works on either side of the stock. The Cross-Stix stabilizer doubles as a monopod or tripod shooting rest, using ball-joint hardware for both vertical and horizontal positioning in a blind, stand, or open field.
Popular options on Amazon
Prices change often - check the current price on Amazon.
Practice targets
Excalibur's compressed-foam block target is built specifically to handle crossbow-level speed and energy, with a 4-sided design for practice from multiple angles and a built-in carry handle. A dedicated crossbow-rated target lasts longer under sustained practice than a general archery target not built for crossbow energy levels.
Cocking and arrow-removal aids
A rope cocking aid and a T-Handle arrow puller round out the basic maintenance kit: the cocking aid reduces felt draw weight by roughly half while keeping string alignment consistent, and the arrow puller protects fletching when removing arrows seated deep in a target. For dedicated crank-based cocking options, see Cocking Devices.
Rev X TD takedown and disassembly
The RevX TD and Excalibur's other TD models break down with Quick-Loc Technology in seconds and without tools: a push button releases the foot stirrup, tilting the stirrup unlocks the riser, and the riser-and-limb assembly lifts off the stock. Reassembly reverses the steps - slide the assembly back on and lock it in place - and the system is designed to hold the same point of impact, so taking the bow down for travel does not cost you your zero. The disassembled crossbow stows in the included Explore Take-Down soft case. Any teardown beyond the takedown joint - limbs, trigger, or riser internals - is a job for an authorized dealer rather than a field disassembly. See the Rev X and the full TD takedown lineup for model-specific detail.
Finding Excalibur crossbow parts in Canada
Excalibur builds its crossbows in Kitchener, Ontario, so Canadian owners can source replacement parts and service close to home. Routine wear items - rail lube, cheek pieces, strings, and cocking aids - are stocked by authorized Canadian dealers, while structural parts such as limbs or trigger components go through an authorized dealer or Excalibur directly rather than a DIY swap. Use the dealer locator to find a service point near you, and check your warranty and serial details before ordering so the part matches your crossbow's production run.
Other Excalibur accessory categories
Maintenance parts are one slice of Excalibur's accessory catalog. If you are outfitting a crossbow beyond upkeep, the main categories are scopes, arrows and bolts, broadheads, and silencers and sound dampening. The accessories hub sorts every category by what it does and which models it fits.
For the full current model lineup these parts fit, see our Excalibur crossbow guide.
Frequently Asked Questions
How long do Excalibur crossbow limbs last?
Limb lifespan depends on use and storage, and Excalibur or an authorized dealer is the right resource for a specific inspection or limbs replacement - see our dealer locator.
How often should I lube an Excalibur crossbow rail?
A light, even coat of rail lubricant like Excalibur's X-Slick should be reapplied regularly as part of routine maintenance to reduce friction and extend string life.
Where can I find Excalibur crossbow replacement parts?
Common wear items like rail lube, cheek pieces, and cocking aids are available as standalone accessories; for structural parts like limbs, contact an authorized dealer.
How do you take down a RevX TD?
Press the stirrup release button, tilt the stirrup to unlock the riser, and lift the riser-and-limb assembly off the stock - Quick-Loc Technology does it in seconds with no tools and is built to keep your zero on reassembly. See the Rev X for model detail.
Where can I buy Excalibur crossbow parts in Canada?
Excalibur is based in Kitchener, Ontario; wear parts come from authorized Canadian dealers, and structural parts like limbs go through a dealer or Excalibur directly - start with the dealer locator.
Ready to check the latest price?
Check X-Slick rail lubricant on Amazon